Vivotek FD9165-HT User Manual page 256

VIVOTEK
camctrl_privilege
uart_httptunnel
transmission_mode
network_wire
network_wireless
network_dualmode
wireless_s802dot11b
wireless_s802dot11g
wireless_s802dot11n
wireless_beginchannel
wireless_endchannel
wireless_encrypt_wep
wireless_encrypt_wpa
256 - User's Manual
<boolean> 0/7
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
1 ~ 14 0/7
1 ~ 14 0/7
<boolean> 0/7
<boolean> 0/7
0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
Indicate whether to support "Manage
Privilege" of PTZ control in the security page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether network dual mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when the version
number (httpversion) is equal or greater than
0305a.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless 802.11g.
Indicate whether to support wireless 802.11n.
Indicate the begin channel of wireless network
Indicate the end channel of wireless network
Indicate whether to support wireless WEP.
Indicate whether to support wireless WPA.