Table of Contents
Advertisement
VIVOTEK
profile_i<0~(m-1)>_gammacur
ve
profile_i<0~(m-1)>_lowlightm
ode
<product dependent>
profile_i<0~(m-1)>_dnr_mode
<product dependent>
profile_i<0~(m-1)>_dnr_stren
gth
<product dependent>
profile_i<0~(m-1)>_defog_mo
de
<product dependent>
profile_i<0~(m-1)>_defog_str
ength
<product dependent>
profile_i<0~(m-1)>_eis_mode
<product dependent>
222 - User's Manual
0~100
4/4
<boolean>
4/4
<boolean>
4/4
1~100
4/4
<boolean>
4/4
1~100
4/4
<boolean>
4/4
0: Fine-turned gamma curve by Vivotek.
1: Gamma value = 0.01
2: Gamma value = 0.02
3: Gamma value = 0.03
...
100: Gamma value = 1
* Note: Although we set gamma value to 100
level, but not all gamma values are valid.
Internal module will take the closest valid one.
For example, 1~45 may all be mapped to
gamma value = 0.45, etc.
* Only available when
"capability_image_c<0~(n-1)>_gammacurve
" is 1
Enable/disable low light mode.
* Only available when
"capability_image_c<0~(n-1)>_lowlightmode
" is 1
3D noise reduction.
0:disable
1:enable
* Only available when
"capability_image_c<0~(n-1)>_dnr" is 1
Strength of 3DNR
* Only available when
"capability_image_c<0~(n-1)>_dnr" is 1
Enable/disable defog mode.
0:disable
1:enable
* Only available when
"capability_image_c<0~(n-1)>_defog_mode"
is 1
Strength of defog
* Only available when
"capability_image_c<0~(n-1)>_defog_mode"
is 1
Electronic image stabilizer
0:disable
1:enable
Advertisement
Table of Contents
