Table of Contents
Advertisement
windowless
evctrlchannel
joystick
remotefocus
<Not recommended to use
this>
npreset
presettourdirection
eptz
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
0,<positive integer>
0/7
0, <positive
0/7
integer>
<boolean>
0/7
0, <positive
0/7
integer>
Bit 7 =>
(only available when bit0 is 1)
External or built-in PT;
0(built-in), 1(external)
Indicate whether to support windowless
plug-in.
Indicate whether to support HTTP tunnel for
event/control transfer.
Indicate whether to support joystick control.
An 4-bit integer, which indicates the supportive
application of remotefocus.
If the value of this parameter is larger than 0,
it means that the camera supports
remotefocus function.
bit 0
=> Indicate whether to support both
zoom and focus function.
bit 1
=> Only support zoom function.
bit 2
=> Only support focus function.
bit 3
=> Currently, this is a reserved bit, and
the default value is 0.
* It's strongly non-recommended to use this.
* This is reserved for compatibility and will not
be used after the version number (httpversion)
is equal or greater than 0400a.
* We replace "capability_remotefocus" with "
capability_image_c0_remotefocus".
Number of preset locations
Indicate whether to support preset tour
direction function. It means users can choose
which direction the preset tour goes.
* We support this parameter when the version
number (httpversion) is equal or greater than
0307a.
For "nvideoin" = 1, the definition is as
following:
A 32-bits integer, each bit can be set
separately as follows:
VIVOTEK
User's Manual - 247
Advertisement
Table of Contents
