Table of Contents
Advertisement
VIVOTEK
7.6network
Group: network
NAME
preprocess
type
resetip
ipaddress
subnet
router
dns1
dns2
176 - User's Manual
VALUE
SECURITY
(get/set)
<positive integer>
6/6
lan,
6/6
pppoe
<boolean>
6/6
<ip address>
6/6
<ip address>
6/6
<ip address>
6/6
<ip address>
6/6
<ip address>
6/6
DESCRIPTION
An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming
service;
To stop service before changing its port
settings. It's recommended to set this
parameter when change a service port to the
port occupied by another service currently.
Otherwise, the service may fail.
Stopped service will auto-start after changing
port settings.
Ex:
Change HTTP port from 80 to 5556, and
change RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service
first.
"/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=
5556& network_rtp_videoport=20480"
Network connection type.
1 => Get ipaddress, subnet, router, dns1,
dns2 from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter,
dns1, and dns2.
IP address of server.
Subnet mask.
Default gateway.
Primary DNS server.
Secondary DNS server.
Advertisement
Table of Contents
