Table of Contents
Advertisement
preset_i<0~(k-1)>_name
preset_i<0~(k-1)>_zoom
preset_i<0~(k-1)>_focus
preset_i<0~(k-1)>_
dwelling
preset_i<0~(k-1)>_focus
setting
patrolseq
patroldwelling
disablemdonptz
defaulthome
axisz
axisf
string[40]
capability_ptz_c<0~(n-1)
>_minzoom ~
capability_ptz_c<0~(n-1)
>_maxzoom
capability_ptz_c<0~(n-1)
>_minfocus ~
capability_ptz_c<0~(n-1)
>_maxfocus
0 ~ 999
sync,
fixcurrent
string[120]
string[160]
<boolean>
<boolean>
capability_ptz_c<0~(n-1)
>_minzoom ~
capability_ptz_c<0~(n-1)
>_maxzoom
capability_ptz_c<0~(n-1)
>_minfocus ~
capability_ptz_c<0~(n-1)
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* Only available when bit7 of
capability_ptzenabled is 1
1/4
Name of the preset location.
1/4
Zoom position at each preset location.
1/4
Focus position at each preset location.
1/4
The dwelling time of each preset
location
1/4
The focus mode of each preset, which is
essential and should be grouped with
"preset_i<0~(k-1)>_name."
* We support this parameter when the
version number (httpversion) is equal or
greater than 0305b.
1/4
(For external device)
The indexes of patrol points, separated
by ","
1/4
(For external device)
The dwelling time of each patrol point,
separated by ","
1/4
Disable motion detection on PTZ
operation.
1/4
This field tells system to use default
home position or not.
1/4
Custom home zoom position.
1/4
Custom home focus position.
VIVOTEK
User's Manual - 323
Advertisement
Table of Contents
