Table of Contents
Advertisement
paritybit
stopbit
uartmode
7.45 Lens configuration
Group: lens for n channel products
n denotes the value of "capability_nvideoin"
(capability.image.c<0~(n-1)>.lensconfiguration.support = 1)
NAME
selected
Group: lens_default
NAME
totalnumbers
Group: lens_user
NAME
totalnumbers
Group: lens_default_i<0~(n-1)> n is lens_default_totalnumbers
NAME
none,
4/4
odd,
even
1,2
4/4
rs485
4/7
VALUE
SECURITY
(get/set)
<string>
6/7
VALUE
SECURITY
(get/set)
0,<positive integer>
6/7
VALUE
SECURITY
(get/set)
0,<positive integer>
6/7
VALUE
SECURITY
For error checking.
"1": One stop bit is transmitted to indicate the
end of a byte.
"2": Two stop bits are transmitted to indicate
the end of a byte.
If you want to transfer the stopbit for 150% of
the normal time used to transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set as 2
and the uart_i<0~(n-1)>_databit set as 5 as
well.
RS485 mode.
DESCRIPTION
Current selected lens profile.
e.g. lens_selected=lens_default_i0, it means
choosen lens configuration is i0 lens of default
group.
DESCRIPTION
Totoal support number of the default lens
profiles
DESCRIPTION
Totoal support number of the user lens profiles
DESCRIPTION
VIVOTEK
User's Manual - 329
Advertisement
Table of Contents
