Crestron MT-1000C
3.8 Inch RF Remote: MT-1000C
Introduction
Programming Guide – DOC. 6330A
This guide contains programming and configuration information for the
MT-1000C 3.8 inch RF remote. For detailed operation information, refer to the
latest version of the MT-1000C Operations Guide (Doc. 6322), available from
®
the Crestron
website (http://www.crestron.com/manuals).
Programmable Buttons
The MT-1000C has 16 hard key programmable buttons.
● VOL Up/Down (Join numbers 1 and 2)
● CH Up/Down (Join numbers 3 and 4)
● MUTE (Join number 5)
● INFO (Join number 6)
● Thumb pad with UP (Join number 7),
RIGHT (Join number 8), DOWN (Join
number 9), LEFT (Join number 10),
and SELECT (Join number 11)
NOTE: To program hard buttons 14, 15 and 16, the MT-1000C must contain
firmware version 2.22.1.50420, and you must use VisionTools
3.3.3.6 or later. To view the firmware version, press and hold the MAIN button
for five seconds. Then select System.
3.8 Inch RF Remote
● MENU (Join number 12)
● EXIT (Join number 13)
● Page Back (Join number 14)
● Page Forward (Join number 15)
● MAIN (Join number 16)
®
Pro-e version
3.8 Inch RF Remote: MT-1000C • 1