Crestron MT-1000C Programming Manual page 10

3.8 Inch RF Remote Crestron MT-1000C
C2Net-Device Slot in Configuration Manager
An RF gateway device is required to incorporate an MT-1000C into a system.
The C2Net-Device Slot can accept a gateway such as the CNRFGWA-418.
Once a gateway is configured in a C2Net-Device Slot, the slot allows Cresnet
communication between the MT-1000C and the control system.
NOTE: An MC2W control system can be programmed to operate at 418 MHz
without the need for a CNRFGWA-418.
To incorporate the CNRFGWA-418 into the system, drag the CNRFGWA-418
from the Wireless Receivers | Wireless Receivers (RF) folder of the Device
Library and drop it in the System Views. The PRO2 system tree displays the RF
gateway in slot 9 with a default Net ID of 24 as shown in the following
illustration.
NOTE: The first CNRFGWA-418 in a system is preset with a Net ID of 24,
when its symbol is dragged into the upper pane of System Views. Additional
CNRFGWA-418 units are assigned different Net ID numbers as they are added.
C2Net Device, Slot 9
Right-click on the CNRFGWA-418 in the System Views tree.
NOTE: The RFID in SIMPL Windows and in VT Pro-e must be the same.
6 • 3.8 Inch RF Remote: MT-1000C
Programming Guide - DOC. 6330A