Table of Contents
Advertisement
Crestron TSR-302
Configure the TSR-302
Single Gateway Setup
Configuration Guide – DOC. 7663A
RF Setup
From the main menu, touch RF Setup to display the RF Setup menu.
RF Setup Menu
The RF Setup screen shows the RF signal strength and has controls for enabling or
disabling roaming.
Before a TSR-302 can be used with a Crestron control system, it must first be
acquired by a CEN(I)-ERFGW-POE Extended Range RF Wireless Gateway (sold
separately).
When roaming is not enabled, i.e., a single gateway is used, there is a Single
Gateway Setup button at the bottom of the screen.
To acquire a TSR-302, perform the following steps:
1.
Use a stylus or other thin-tipped object to press ACQUIRE on the
CEN(I)-ERFGW-POE gateway to enter Acquire mode. The accompanying
LED illuminates, indicating the unit is ready to link with the touch screen.
(The gateway can also be put into Acquire mode via Crestron Toolbox.)
2.
Place the TSR-302 in Acquire mode by touching Acquire on the RF Setup
menu, shown in the following illustration. The screen displays an "Acquire
in progress" message and the TSR-302 is automatically acquired by the
gateway within 2 minutes.
Handheld Touch Screen Remote
Handheld Touch Screen Remote: TSR-302 • 3
Hide quick links:
Advertisement
Table of Contents
