Crestron MT-1000C Programming Manual page 24

3.8 Inch RF Remote Crestron MT-1000C
NOTE: Additional properties may be modified, refer to "Select Property to
Modify Area" on page 22.
Modified Properties
In addition to selecting and positioning the graphics for the battery animation
and RF indicator animation, you may choose to modify the image dithering,
drawing proportions, and browse and select additional images. Use the pull
down Select Property to Modify list in the upper right side of the Properties
window. Each of these properties is described in the following sections.
Select Property to Modify Pull Down List
Modified Properties – Dithering
Dithering is used when the full color range of an image cannot be displayed. It is
a method of reducing the color range while maintaining a usable graphic. The
MT-1000C uses 16 bit non-palette graphics, up to 65,536 colors. Select
Dithering from the Select Property to Modify pull down list. Click the Enable
check box. The dithering property selection permits you to choose from a
variety of dithering methods from the pull-down Type list. Adjust your dithering
choice for the best possible results on the display. You may also select 8-bits or
16-bits per pixel.
Select Property to Modify - Dithering
20 • 3.8 Inch RF Remote: MT-1000C
Programming Guide - DOC. 6330A