Crestron MT-1000C Programming Manual page 11

3.8 inch rf remote

Hide thumbs Also See for MT-1000C:

Table of Contents

Crestron MT-1000C

Programming Guide – DOC. 6330A

Select Add item to: "CNRFGWA-418" and choose an MT-1000C from the

"Select New Device" window as shown in the following diagram and click OK.

Alternatively, the MT-1000C device can be dragged from the Wireless Remotes

(RF) folder of the Device Library to the CNRFGWA-418 device in the

C2Net-Device slot.

NOTE: The MT-1000C at RF ID 00 may return an error when compiling

SIMPL program for X-Generation processors.

NOTE: If the MT-1000C is not a selectable device, check that Device Library

version 321 or later is installed, and that the device you are adding the

MT-1000C to is a CNRFGWA-418 gateway.

Adding an MT-1000C

Setting the RF ID in Device Settings

Double-click the MT-1000C icon to open the "Device Settings" window. This

window displays the MT-1000C device information. If necessary, select the

RF/IR ID tab to change the RF ID, as shown in the following figure. The RF ID

range is 00 through F0.

"Device Settings" Window for the MT-1000C

3.8 Inch RF Remote

3.8 Inch RF Remote: MT-1000C • 7

Table of Contents