Crestron MT-1000C Operation Manual
3.8 inch rf remote
Hide thumbs
Also See for MT-1000C:
- Specification sheet (26 pages) ,
- Programming manual (36 pages) ,
- Operation manual (40 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Programming Manual
Advertisement
Table of Contents
Related Manuals for Crestron MT-1000C
Summary of Contents for Crestron MT-1000C
- Page 1 Crestron MT-1000C 3.8 Inch RF Remote Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Crestron MT-1000C Contents 3.8 Inch RF Remote: MT-1000C Introduction ...1 Setup...6 Problem Solving ...13 Return and Warranty Policies...15 Operations Guide – DOC. 6322 Features and Functions...1 Specifications ...2 Physical Description...3 Battery Installation and Replacement...6 Docking Station Setup...7 User Configuration Menus ...8 Industry Compliance ...12... -
Page 5: 3.8 Inch Rf Remote: Mt-1000C
A fast-charging lithium ion battery pack provides long-lasting wireless operation and eliminates “memory” issues typical of other rechargeable batteries. Recharging the MT-1000C is made easy using the included docking station. Other convenience features include an integral movement sensor to automatically turn on the touchpanel backlight without having to touch the screen or buttons. -
Page 6: Specifications
3.8 Inch RF Remote Specifications Specifications for the MT-1000C are given in the following table. MT-1000C Specifications 1. Expected battery life is approximately seven days in an inactive state, and approximately four 2. CNRFGWA-418 or MC2W gateway/receiver required (maximum 15 touchpanels per gateway). -
Page 7: Physical Description
Physical Description Refer to the following physical views. The touchpanel and buttons are available on the top of the MT-1000C. The battery compartment and battery charge contacts are located on the bottom. The programming port is on the rear side. - Page 8 3.8 Inch RF Remote Crestron MT-1000C Physical Dimensions – MT-1000C Top, Side and Front Views Physical Dimensions – Docking Station 4 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322...
- Page 9 The MT-1000C has 13 programmable buttons. Programmable Button Locations NOTE: Button numbers are for programming purposes only. Refer to the latest version of the MT-1000C Programming Guide (Doc. 6330), available from the Crestron website (http://www.crestron.com/manuals) for programming details. Non-Programmable Buttons The MT-1000C has three non-programmable buttons.
-
Page 10: Setup
MT-1000C Programming Guide (Doc. 6330), which is available from the Crestron website. MT-1000C Docking Station Indicators and Port The MT-1000C has two indicators and one port on the docking station. Setup Battery Installation and Replacement 1. Unlock the rear battery cover by rotating the locking screw clockwise. -
Page 11: Docking Station Setup
“DC 5V”. The red Power LED should turn on. Docking Station Power Supply Hookup Operations Guide – DOC. 6322 pinched when you replace the battery cover. lock. 3.8 Inch RF Remote: MT-1000C • 7 3.8 Inch RF Remote... -
Page 12: User Configuration Menus
3.8 Inch RF Remote Crestron MT-1000C Place the MT-1000C in the cradle of the docking station and press down until you hear a click. When the MT-1000C is properly seated on the docking station, the Status LED lights up red while the battery is charging. The status LED turns blue when the battery is fully charged. - Page 13 You can select up to three minutes for on the battery operation and up to four minutes for on the docking station operation. Bright Adjust the display brightness slider. NOTE: A brighter display reduces battery life. Operations Guide – DOC. 6322 3.8 Inch RF Remote 3.8 Inch RF Remote: MT-1000C • 9...
-
Page 14: Button Light
Buttons can be backlit when touched, or always off to conserve battery life. Sound Adjust the volume of programmed audio. Date & Time Set the date and time. 10 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322... - Page 15 Displays the remaining charge and sets the low battery indication level. System Displays system memory and version information. Pickup Sets the MT-1000C to turn on when picked up or moved. Operations Guide – DOC. 6322 3.8 Inch RF Remote 3.8 Inch RF Remote: MT-1000C • 11...
-
Page 16: Industry Compliance
Exit The Exit button returns the MT-1000C to normal operation. Industry Compliance As of the date of manufacture, the MT-1000C has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. -
Page 17: Care And Maintenance
The touchscreen contains a glass element; avoid dropping or impacting against anything. • If water is spilled on the MT-1000C, remove the battery pack and allow the MT-1000C to dry for 48 hours before using. • Clean the outside with a cloth dampened with diluted non-ammonia glass cleaner. -
Page 18: Further Inquiries
Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the MT-1000C, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. -
Page 19: Return And Warranty Policies
All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Operations Guide – DOC. 6322 3.8 Inch RF Remote 3.8 Inch RF Remote: MT-1000C • 15... - Page 20 Crestron Electronics, Inc. Operations Guide – DOC. 6322 15 Volvo Drive Rockleigh, NJ 07647 12.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.