Programming With Visiontools Pro-E; Example Program - Crestron MT-1000C Programming Manual

Crestron MT-1000C
Programming Guide – DOC. 6330A
The pushbuttons and thumbpad hard keys have fixed join numbers
corresponding to the <press1> to <press16> outputs of the touchpanel symbol.
NOTE: A hard key button continuously sends signal pulses as long as the
button is held (except the MAIN button, join 16 is a momentary pulse).
NOTE: If a hard key is not defined, the button will have no function when
pressed.

Example Program

An example program for the MT-1000C is available from the "Example
Program" section of the Crestron website
(www.crestron.com/exampleprograms
MT-1000C.ZIP.
Programming with VisionTools
VisionTools Pro-e (VT Pro-e), a design and programming Windows-based
software, permits the creation of unlimited control screen variations
incorporating two and three-dimensional graphics, text and sounds (recorded as
WAV files). A set of pages, which make up a project, can be designed for each
MT-1000C touchscreen application. Each page contains objects such as custom
control graphics, two and three-dimensional buttons which allow the user to
interface with the control system via join numbers.
NOTE: Shaded buttons are not supported in this application.
NOTE: The Clock/Date object does not have a frame, is always rectangular, has
a limited font set, and does not have a selectable text style.
NOTE: Transparency is not supported for object face or graphic resources.
NOTE: The MT-1000C does not support sub-pages.
Unjoined objects are not interfaced with the system and thus cannot initiate any
control system functions. The completed and compiled project is uploaded to the
touchscreen via the File | Upload Project command. The MT-1000C uses the
programmed project until another project is uploaded from the PC. Programs
cannot be extracted from the touchscreen. The PC may be disconnected from the
control system or panel except during programming upload.
Crestron's Synapse™ image-rendering algorithm supports advanced anti-
aliasing for crisper, sharper images for all objects, new frame styles (neon and
raised), and new text styles (embossed, raised, and shadow). Shaded style is not
supported for the MT-1000C. The Synapse algorithm allows the touchpanel to
process these styles internally, without the use of large bitmap files that increase
project size and upload time. Synapse delivers high impact touchpanel graphics
more efficiently than ever. To utilize Synapse graphics, you must use VT Pro-e
version 3.4.x or later.
For additional software information, refer to the help file provided with the
software. The latest version of VT Pro-e can be obtained from the Crestron
website.
The RF ID is used for communicating with the RF receiver. VT Pro-e can also
be used to program page jumps for soft key presses or hard buttons.
3.8 Inch RF Remote
. Search for the file named
)
®
Pro-e
3.8 Inch RF Remote: MT-1000C • 9