Configuration Differences; Leading Specifications - Crestron CT-3500 Operation Manual

Leading Specifications

6 Series 3500 Touchpanels
CRESTRON
6-Pin Jack Pinout (for CN-RJ11)
PIN # SIGNAL
1 +24 V (Network)
2 +24 V (Network)
3 Y (Data)
4 Z (Data)
5 GND (Network)
6 GND (Network)

Configuration Differences

There are four Series 3500 configurations available and selection depends on type of
installation (tiltcase or lectern mount) and whether video is required. A
configuration is defined by one of two prefixes, CT- or VT-, and one of two suffixes,
no suffix or L. The VT- prefix identifies the touchpanel as having video capability.
No suffix indicates an adjustable tiltcase configuration; these units are moveable
and can tilt. The "L" suffix identifies the touchpanel as a lectern mount. Refer to the
table after this paragraph for a concise listing of each Series 3500 configuration.
NOTE: Wall-mount and rack-mount kits are available options that can be
purchased with lectern-mount configurations. Parts and instructions are provided
with each kit.
Series 3500 Touchpanel Configurations
CONFIGURATION
CT-3500
CT-3500L
VT-3500 256 Color (255 Color plus one Video)
VT-3500L 256 Color (255 Color plus one Video)
The table after this paragraph provides a summary of leading specifications for the
Series 3500 Touchpanels. Dimensions and weight are approximations rounded to
the nearest tenth unit.
Leading Specifications for Series 3500 Touchpanels
SPECIFICATION
Power Requirements
CRESNET Power Factor
CRESNET II Workshop
CRESNET II Operating System
VisionTools for Windows
Memory
COLOR
#1
WHT
BLK
RED
GRN
YEL
BLU
DISPLAY
256 Color
256 Color
DETAILS
24 Watts, 24 VDC 1.0 Amp for VT-3500/L
18 Watts, 24 VDC 0.75 Amp for CT-3500/L
24 Watts for VT-3500/L
18 Watts for CT-3500/L
Version 4.20.03 or later
3.11.18 or later
Version VTW 6.8 or later
1 Mbyte
Operations Guide - DOC. 8108B
TAB (VISIBLE, ON TOP)
INSTALLATION
Movable and can tilt
Lectern mount
Movable and can tilt
Lectern mount