Table of Contents
Advertisement
CRESTRON
Workshop Screens (2 of 2)
SIMPL Windows
SIMPL Windows was designed to supersede the CRESNET II Workshop. It
provides a well-designed graphical environment with a number of workspaces (i.e.,
windows) in which a programmer can select, configure, program, test, and monitor
a CRESNET control system.
NOTE: The following description assumes that the reader has some knowledge of
SIMPL Windows. If not, please refer to the extensive help information provided
with the software.
Using the same example in the previous Workshop section, the following
paragraphs and illustrations provide insight to a small portion of a CRESNET
control system developed with SIMPL Windows.
To begin, the programmer should envision the system in block diagram form,
shown below.
Block Diagram of CRESNET Control System
Use the Configuration Manager workspace in SIMPL Windows to select and
configure all the devices that need to be included into the system. For this example,
a CT-3500 must be added to the system and its NET ID must be set to 11, shown
after this paragraph.
Operations Guide - DOC. 8108B
Series 3500 Touchpanels
17
Advertisement
Table of Contents
