Configuration - Crestron TS-70 Series Product Manual

Configuration

Prior to configuration, ensure the device is running the latest firmware. To update the firmware,
refer to Update Firmware (on
When power is applied for the first time, the following screen is displayed. The touch screen may
take up to two minutes to boot.
NOTE: TS-70R series touch screens boot to the Crestron Home application setup screen. For
more information on configuring the Crestron Home application, refer to the
OS™ Product Manual.
Touch the screen to display the main Setup screen (TS-1070 shown)
Device settings for the touch screen may be configured using the built-in setup screens or the
web configuration interface.
To configure the device using the built-in setup screens, refer to
l
page 82).
To configure the device using the web configuration interface, refer to
l
(on page 116).
Product Manual — Doc. 8555F
page 118).
Crestron Home
Local Configuration (on
Web Configuration
TS-70 Series • 81