Local Configuration; Ethernet Setup - Crestron TSS-770 Product Manual

Local Configuration

Refer to the following sections for information about configuring the device locally using its
setup screens.

Ethernet Setup

Tap Ethernet Setup on the Setup screen to display the Ethernet Setup screen.
Ethernet Setup Screen
Use the Ethernet Setup screen to view the touch screen MAC and IP addresses, subnet mask
address, default router address, primary and secondary DNS addresses, hostname, and domain.
A Link indicator is provided to indicate the status of the Ethernet connection. (Green indicates
that the Ethernet connection is active.)
The following buttons are provided for configuring Ethernet settings:
Tap On or Off under LAN Access to turn the Ethernet adapter on or off. If LAN Access is
l
set to Off, Ethernet will not function and a Wi-Fi connection can be established.
Tap On or Off under DHCP Enable to turn DHCP (dynamic host configuration protocol) on
l
or off.
NOTE: DHCP is turned on by default.
If DHCP is turned off, tap Set Static IP Address Settings to enter static IP addresses
l
manually.
Tap Set Hostname to enter a new touch screen hostname using an on-screen keyboard.
l
Product Manual — Doc. 8745C TSS-770 and TSS-1070 • 3