Crestron CT-3500 Operation Manual page 8

CRESTRON
Physical Views of CT- and VT-3500L (CT-3500L does not have VIDEO ports)
Interface Modules
NOTE: All Series 3500 touchpanels are supplied with cable assemblies that
connect to the interface modules. Pinout information of these assemblies is provided
in this section of the Operations Guide. If the assembly must be "user-modified" in
any way, Crestron cannot guarantee the behavior of the touchpanel. The product
may not function accordingly, as stated in this Operations Guide.
There are three interface modules available for the Series 3500 Touchpanels: VT-
3500IMC and VT-3500IMW for the VT-3500 and CN-RJ11 for the CT-3500.
The VT-3500IMC, shown below, is supplied with every VT-3500. The module is
housed in a black enclosure with silk-screened top panel. A 4-pin network
connector and two BNC connectors (for the video source) are located on one side of
the unit. An 8-position, 8-pin modular telephone jack is located on the opposite
side. At the shorter sides of the VT-3500IMC, the enclosure extends to form feet at
a right angle to the side. There are three holes per foot for inserting screws to
further stabilize the unit.
Physical Views of the VT-3500IMC
TOP VIEW
SIDE VIEW (8-POSITION, 8-PIN JACK) SIDE VIEW (4-PIN & BNC CONNECTORS)
4 Series 3500 Touchpanels Operations Guide - DOC. 8108B