Further Inquiries; Syntax - Crestron CT-3500 Operation Manual

20 Series 3500 Touchpanels
CRESTRON
Series 3500 Troubleshooting (Continued)
POSSIBLE
TROUBLE
CAUSE(S)
Unexpected Touchpanel is
response incorrectly calibrated.
from
touchpanel.
Touchpanel Compressed graphics
exhibits take time to
slow decompress.
operation.

Further Inquiries

If after reviewing this Operations Guide for the Series 3500 Touchpanels, you
cannot locate specific information or have questions, please take advantage of
Crestron's award winning technical support team by calling:
In the US and Canada, call Crestron's corporate headquarterrs at 1-
888-CRESTRON [1-888-273-7876] or 1-201-767-3400.
In Europe, call Crestron International at +32.15.730.974.
In Asia, call Crestron Asia at +852.2341.2016.
In Latin America, call +525.574.15.90.
For local support from exclusive Crestron factory-trained personnel call:
In Australia, call Soundcorp at +613.941.61066.
In New Zealand, call Amber Technologies at +649.410.8382.

Syntax

The following syntax codes are provided for compatibility purposes only. It is a
sample of SIMPL-C programming for the block diagram example illustrated in
"Programming" on page 15.
NET.ID <03 to FE>: CTP-3000
i1 = <relay1>
o1 = <relay1_fb>
" = " "
i4 = <relay4>
o4 =<relay4_fb>
CORRECTIVE ACTION
Enter SETUP MODE and recalibrate.
If there are no memory problems,
decompressed graphics decrease the drawing
time of panel pages.
If there are no memory problems, convert 16
color graphics to 256 color to decrease the
drawing time of panel pages.
\i1 refers to join# of touchpanel button
Operations Guide - DOC. 8108B