User Configuration Menus - Crestron MT-1000C Operation Manual

MiniTouch Handheld Wireless Touchpanel
10 • MiniTouch Handheld Wireless Touchpanel: MT-1000C
IR ID
Every MT-1000C touchpanel communicating via IR with a Cresnet control system
through a CNXRMIRD receiver, a C2N-IRGW Series IR gateway or directly to an
MC2W control system, requires a unique IR ID to secure IR communications. There
are two useable codes (two-digit hexadecimal numbers): 00 and 10; the default is 00.
The IR ID of the unit, set in VT Pro-e, must match the IR ID specified in the SIMPL
Windows program.

User Configuration Menus

To display the User Configuration screens, press and hold the MAIN button for five
seconds. The following menus are displayed in the settings screen.
NOTE: The configuration screen automatically times out after 30 seconds of
inactivity and returns to normal operation.
Backlight
Adjust the timeout of the backlight both on and off the docking station (cradle). You
can select up to three minutes for on the battery operation and up to four minutes for
on the docking station operation.
Crestron MT-1000C
Operations Guide - DOC. 6322A