Quick Guide to Touchpanel Connections
AUDIO INPUT
This 6-position, mini-terminal block connector provides line
level, balanced and unbalanced audio input.
AUDIO Pinouts – Balanced
PIN #
NOTE:
When sending balanced audio from a CNX-BIPAD8 or CNX-PVID device, only the
Positive (+) and Negative (-) left and right wires are to be connected to the touchpanel. Do
not connect the Shield (S) wires (pins 1 and 6).
AUDIO Pinouts – Unbalanced
PIN #
NOTE:
Using two jumpers, connect R Shield to R - and L Shield to L - respectively at the
TPS-3100L Audio Input connector.
Doc. 4903
42
DESIGNATION
1
S
2
R+
3
R -
4
L+
5
L -
6
S
DESIGNATION
1
S
2
R+
3
R -
4
L+
5
L -
6
S
DESCRIPTION
Shield
Right Input (Positive)
Right Input (Negative)
Left Input (Positive)
Left Input (Negative)
Shield
DESCRIPTION
Ground
Right Input (Positive)
Right Ground
Left Input (Positive)
Left Input Ground
Ground
Crestron Quick Guide to Touchpanel Connections
Crestron
AUDIO INPUT