Video Connection Example - Balanced S-Video From Cnx-Pvid; Qm (Quickmedia Versions Only) - Crestron TPS-3000 Connection Manual

Crestron
Video Connection Example -
Using a standard EIA-568B CAT5 cable, program the S-video to output from
level 2 of the CNX-PVID C (Chrominance) and level 1 for Y (Luminance).
FROM PIN CNX-PVID
(ROOMS 1 – 8)
RJ-45 CONNECTOR
1 Level 1 +
2 Level 1 -
3 Level 2 +
6 Level 2 -

QM (QuickMedia versions only)

QM versions of the TPMC-15 and TPMC-17 feature
two QM input ports for connecting two QM sources
and one QM output port for connecting a QM
receiver or any other device with a QM input, such
as a QM switcher (QM-MD-8X8) or receiver
(QM-RMCRX-BA).
NOTE: When transmitting S-video, luminance uses the green video pathway, and
chrominance uses the red video pathway. When transmitting composite video, the signal is
carried on the blue video pathway.
NOTE: When using Crescat-QM wiring, four additional wires are included for making
Cresnet connections.
Each QM port is an 8-Pin RJ-45 connector. Pinouts are described in the
following table.
RJ-45 Pin Assignments
PIN
1
2
3
4
5
6
7
8
Crestron Quick Guide to Touchpanel Connections
Quick Guide to Touchpanel Connections
Balanced S-Video from CNX-PVID
WIRE COLORS
(568B)
WHITE/ORANGE
ORANGE
WHITE/GREEN
BLUE
WHITE/BLUE
GREEN
WHITE/BROWN
BROWN
TO PIN TPMC-15-CH OR TPMC-17-CH
VIDEO IN CONNECTOR 1 OR 2
RJ-45 CONNECTOR
1 +Luminance
2 - Luminance
3 + Chrominance
6 - Chrominance
QM RGB
ASSIGNMENT
- RGB Red
+ RGB Red
- RGB Green
+ Digital Audio
- Digital Audio
+ RGB Green
- RGB Blue
+ RGB Blue
QM ASSIGNMENT:
COMPOSITE,
S-VIDEO AND AUDIO
- CHROMINANCE
+ CHROMINANCE
- LUMINANCE
+ AUDIO
- AUDIO
+ LUMINANCE
- COMPOSITE
+ COMPOSITE
Doc. 4903
7