Video In - Crestron TPS-3000 Connection Manual

Quick Guide to Touchpanel Connections

VIDEO IN

This eight-pin RJ-45 connection provides connectivity to the
CNX-PVID or the TPMC-CH-IMC interface module.
This port provides component, composite or S-video balanced
input to the touchpanel over Crestron Certified Wiring.
Description of the pinouts is shown in the following table. A cable
for this connection is provided with the touchpanel.
CAUTION: Only use the TPMC-CH-IMC Interface Module when connecting this port. Use of
other "IMC" products could damage the panel. Earlier IMC modules were equipped with a
proprietary 10-pin RJ cable. If this is inadvertently connected to the 8-pin RJ-45 connector
the panel will be damaged.
NOTE: Only one video source may be displayed at a time.
Video In Pin Assignments
PIN WIRE COLORS (568B)
1 WHITE/ORANGE
2 ORANGE
3 WHITE/GREEN
4 BLUE
5 WHITE/BLUE
6 GREEN
7 WHITE/BROWN
8 BROWN
Doc. 4903
16
COMPOSITE
+ Composite + Luminance
- Composite - Luminance
N/A + Chrominance
N/A
N/A
N/A - Chrominance
N/A
N/A
Crestron Quick Guide to Touchpanel Connections
Crestron
S-VIDEO COMPONENT
+ Y
- Y
+ P
N/A + P
N/A - P
- P
N/A N/A
N/A N/A
B
R
R
B