Crestron
NET
This 4-position mini-terminal block connector is used to
connect to other Cresnet peripherals in a system.
Another NET connector is located on the other side of the
module. Data and power for the TPMC-CH-IMC are provided
via either connection.
Pins 24 and G provide 24 VDC and ground.
Pins Y and Z provide communications (data).
VIDEO
The video input consists of three BNC
connectors for unbalanced video signals. The
component, composite or S-video input
signal from an external video source is
connected to these ports.
AUDIO IN
The 5-position mini-
terminal block
connector is wired to
an external audio
source and provides
balanced and/or
unbalanced audio
input.
AUDIO OUT
The 5-position mini-
terminal block
connector mates
with the included
connector and
provides balanced
and/or unbalanced
microphone output.
Crestron Quick Guide to Touchpanel Connections
Quick Guide to Touchpanel Connections
PIN
L +
L -
G
R +
R -
PIN
L +
L -
G
R +
R -
AUDIO IN Pinouts
DESCRIPTION
Left Positive
Left Negative
Ground
Right Positive
Right Negative
AUDIO OUT Pinouts
DESCRIPTION
Left Positive
Left Negative
Ground
Right Positive
Right Negative
Doc. 4903
19