Audio Setup - Crestron TSW-560 Supplemental Manual

•
•
•
•
On the Ethernet Setup - IP Table screen, tap Save to save the current entry or Delete to
clear it. If no changes are made, tap < Back to return to the Ethernet Setup screen.
•

Audio Setup

On the Setup screen, tap Audio Setup to display the Audio Setup screen.
Audio Setup Screen
Use the Audio Setup screen to control the volume, media volume, and beep volume
settings for the touch screen:
NOTE:
the Volume controls.
•
•
•
Tap < Back to return to the Setup screen.
Supplemental Guide – DOC. 7927F
Use the keyboard to make the new entry.
Tap the clear button (
Tap the delete button (
Tap Save to save a new entry or tap < Cancel to discard any changes. The display
returns to the Ethernet Setup - IP Table screen.
Tap < Back again to return to the Setup screen.
The Media Volume controls adjust the H.264 streaming media level in relation to
Volume: Tap the up and down arrows to raise or lower the master volume of the
touch screen, from 0 to 100%. Tap Mute On or Mute Off to mute or unmute the
master volume. Tap Test to play a test recording at the current volume level.
Media Volume: Tap the up and down arrows to raise or lower the media volume of
the touch screen, from 0 to 100%. Tap Mute On or Mute Off to mute or unmute
the media volume.
Beep Volume: Tap the up and down arrows to raise or lower the beep volume of
the touch screen, from 0 to 100%. Tap Beep On or Beep Off to turn the beep
volume on or off.
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 7
) in the text field to clear any previous entry.
) to delete the last digit.