Crestron TPS-3000 Connection Manual page 14

Quick Guide to Touchpanel Connections
QM Input #1 provides adjustable delay skew compensation for optimizing
video signals. The compensation corrects color separation problems that can
occur when CAT5 cables have variations in the pair lengths. The twisting of
the cable pairs inside the cable sheath causes this variation in length. To
ensure sufficient bandwidth to support signal resolutions up to 1600 x 1200 @
60 Hz, the maximum aggregate cable length (total length from transmitter to
receiver) should not exceed 328 feet.
QM Input #2 does not have adjustable delay skew compensation. QM Input
#2 is capable of the following signals, resolutions, and cable lengths:
QM Input # 2 Maximum Cable Length
SIGNAL TYPE
Video/S-video
Component
Component
Component
* Using CresCAT-QM cable, available from Crestron. Using other cable may
vary performance.
Doc. 4903
8
RGB 1024 x 768 @ 75 Hz
RGB 1280 x 1024 @ 75 Hz
RGB 1600 x 1200 @ 60 Hz
RGB 640 x 480 @ 60 Hz
RGB 800 x 600 @ 60Hz
RGB 1024 x 768 @ 60Hz
RGB 1280 x 768 @ 60Hz
RESOLUTION
480i
480p
720p
1080i
Crestron Quick Guide to Touchpanel Connections
Crestron
MAXIMUM CABLE
LENGTH* (FEET)
300
300
300
300
69
40
20
216
136
84
50