Crestron TPS-3000 Connection Manual page 36

Quick Guide to Touchpanel Connections
Mixed systems (i.e., balanced audio with unbalanced video and unbalanced
audio with balanced video) are permitted; only make those connections that
are necessary.
NOTE: Distribution of balanced video should not exceed 500 feet (152.4 meters) and the
distribution for unbalanced video should not exceed 100 feet (30.5 meters). For distances
greater than these specified lengths use a distribution amplifier.
Pinout Connections for the TPS-2000L
PIN SIGNAL
NAME
1 Audio In +
2 Audio In -
3 Ground/Shield
4 MIC Out +
5 MIC Out -
6 Ground/Shield
7 Video In +
8 Video In -
NOTE: Balanced sources can be received from CNX-PVID (video), CNX-BIPAD (audio), or
CNXRMCLV (audio and video) devices.
Doc. 4903
30
BALANCED UNBALANCED
AUDIO & AUDIO IN
VIDEO
Audio In + Audio In +
Audio In - Audio
N/C Ground
MIC Out + NOTE:
Jumper pins
MIC Out -
2 & 3
N/C
Video In +
Video In -
UNBALANCED
AUDIO OUT
MIC Out +
N/C
MIC Ground
Crestron Quick Guide to Touchpanel Connections
Crestron
UNBALANCED
VIDEO
NOTE:
Jumper pins 6 & 8
Video Ground
Video +
Video Ground