Front View - Cisco ASR1002 Installation Manual

Cisco ASR 1002 Router Description
The Cisco ASR 1002 Router supports:
•
•
•
•
•
The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly
and the power supply modules as field-replaceable units. The Cisco embedded ASR1000-SIP10 and
Cisco built-in ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the
shared port adapters in the SIP are field upgradable.
This section contains the following topics:
•
•
•

Front View

Figure 8-1
Figure 8-1
1
2
Note The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable
and the Cisco ASR 1000 Series Route Processor is embedded in the chassis and not field upgradeable.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
8-2
Cisco ASR1000-ESP5 or Cisco ASR1000-ESP10 as a field-replaceable unit (FRU)
The Cisco Embedded Route Processor which supports 2MB upgradeable BootROM and 8 GB eUSB
bulk storage.
1 + 1 redundant AC or DC power supplies.
Stratum-3 network clocking per GR-1244-CORE, with T1/E1 BITS interface or SPAs as timing
sources.
A built- in 4x1GE Interface providing four SFP based GE connections, designated as SPA bay 0.
Front View, page 8-2
Rear View, page 8-3
Cisco ASR 1002 Router Slot Numbering, page 8-4
shows the Cisco ASR 1002 Router with modules installed.
Cisco ASR 1002 Router—Front View
PWR ACTV
STAT STBY
ASR1000-ESP10
ASR 1002 STAT QE0 QE1 QE2 QE3
pwr min
stat maj
crit
Embedded ASR 1000 Series Route Processor
in the subslot and represents the built in 4xGE
SPA.
SPA subslot 2
Chapter 8
1
BOOT LINK PWR STAT
SPA-4XOC3-POS
2
3 SPA subslot 1
4 SPA subslot 3
Cisco ASR 1002 Router Overview and Installation
3
SPA-4XOC3-POS
SPA-4XOC3-POS
4
OL-13208-09