Cisco ASR1002 Installation Manual page 32

Cisco ASR 1002 Router Power Supplies
Figure 8-22
Figure 8-22
1 Chassis ESD socket
2
AC power supply slot number 0
3
AC power supply On (|) /Off (O) switch
4 AC power supply LEDs
Step 2 Insert the AC power cable into the power supply AC inlet.
Step 3 To ensure that the AC power cord does not interfere with other cables or wires, dress the AC power cable
in one of the following ways.
Leave a small service loop in the AC power cord from the inlet and then secure the power cord
a.
through the AC power supply handle as shown in
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
8-32
shows the various parts of the Cisco ASR 1002 Router AC power supply.
Cisco ASR 1002 Router AC Power Supply Labels
1 2 3 4
OUTPUT INPUT FAN
FAIL OK OK
0
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
8
Chapter 8 Cisco ASR 1002 Router Overview and Installation
5 6
5 AC power supply fan
6
AC power supply captive installation screw
7
AC power supply slot number 1
8 AC power inlet
Figure 8-23. Alternatively, proceed to Step b.
OUTPUT INPUT FAN
FAIL OK OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
1
7
OL-13208-09