Power Supplies In The Cisco Asr 1002 Router - Cisco ASR1002 Installation Manual

Cisco ASR 1002 Router Description
Figure 8-5
Figure 8-5
Table 8-1
Table 8-1 Cisco ASR1000-ESP5 and Cisco ASR1000-ESP10 LEDs
No. LED Label LED
1 PWR Power
2 ACTV Active
3 STAT STATUS
4 STBY Standby
The Cisco ASR 1000-ESP5 can only be used in the Cisco ASR 1002 Router.
Note

Power Supplies in the Cisco ASR 1002 Router

The Cisco ASR 1002 Router power supply module supports the following Cisco power supplies:
•
•
•
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
8-6
shows the LEDs on the Cisco ASR1000-ESP10.
Cisco ASR1000-ESP10 LEDs
describes the Cisco ASR1000-ESP5 and Cisco ASR1000-ESP10 LEDs.
Color
Solid green
Off
Green
Green
Yellow
Red
None
AC power supply operates between 85VAC to 264VAC and DC operates between –40.5 to –72VDC
–48 VDC power supply operates between
+24 VDC power supply operates
Chapter 8 Cisco ASR 1002 Router Overview and Installation
2
1
PWR ACTV
STAT STBY
ASR1000-ESP10
3 4
Behavior in the Power-Up State
All power supplies are within operational limits.
Off, the router is in standby mode.
The embedded services processor is green when
active.
Code has successfully downloaded and is
operational.
BOOT ROM has successfully loaded.
Not booted.
Will always be off.
OL-13208-09