Setting The Options For Automatic Redialing - Canon MultiPASS C755 User Manual

Stop
2
Press
• The MultiPASS asks you to confirm that you
want to cancel.
3
Press
Tone
• Redialing is not canceled until you press T.
• If you change your mind and want to continue
redialing, press #.
• The MultiPASS prints an Error TX Report.
(1 p. 11-4)
n
If you want to cancel a transmission while the unit is waiting to redial, 1 Deleting a
Document From Memory , p. 7-18.

Setting the Options for Automatic Redialing

You can set the following options for automatic redialing:
• Whether or not the MultiPASS redials automatically.
• The number of times the MultiPASS attempts to redial.
• The time interval between redialing attempts.
Follow this procedure to adjust the automatic redialing settings:
Function
1
Press
01
2
Press
Data Registration
Set
3
Press
08
4
Use or
Set
5
Press
08
6
Use or
Set
7
Press
• To disable automatic redialing, use d or u to
select OFF, then press Set. Press Stop to
return to standby mode.
• To enable automatic redialing, use d or u to
select ON. Continue with the steps below.
Chapter 7
.
to cancel redialing.
.
.
.
02
to select TX SETTINGS.
.
02
to select AUTO REDIAL.
.
CANCEL? AYES #NO
YES=(A) NO=(#)
DATA REGSTRATION
USER SETTINGS
TX SETTINGS
ECM TX
AUTO REDIAL
Ex:
Sending Faxes
ON
7-11