Switching Temporarily To Tone Dialing - Canon MultiPASS C755 User Manual

6
Use the numeric buttons to dial the country
code, the area code, and the fax/telephone
number of the other party.
• If you enter the wrong number, press Stop
and start again from step 4.
7
If necessary, press
• A pause at the end of a number (P) is fixed to
ten seconds.
Start
8
Press
• To cancel the transmission once dialing has
started, press Stop then T. (1 p. 7-9)
n
To take advantage of the speed dialing features of your MultiPASS, register frequently
used overseas numbers for one-touch or coded speed dialing. (1 pp. 6-3, 6-6)

Switching Temporarily to Tone Dialing

Many information services for banks, airline reservations, hotel reservations, etc.,
require tone dialing for their services. If your MultiPASS is connected to a rotary pulse
line, follow this procedure to set the unit temporarily for tone dialing:
Hook
1
Press
• You can also lift the handset of the telephone
connected to your unit instead of pressing
Hook.
2
Use the numeric buttons to dial the
telephone number of the information
service.
• The unit connects using the pulses required by
your telephone line.
3
When the recorded message of the
information service answers, press
switch to tone dialing.
• When T is pressed, T is displayed in the LCD.
• If you pressed Hook in step 1, you can pick
up the handset of the telephone if you need to
talk to the other party.
Chapter 9
Redial /Pause
to enter a pause.
to begin scanning for sending.
.
Ex:
TEL= 011p811234
Ex:
TEL= 011p811234P
TEL=
Ex:
TEL=
Ex:
TEL=
to
Tone
Special Features
7654321
7654321T
9-3