Periodic Cleaning; Cleaning The Multipass' Exterior; Cleaning The Multipass' Interior; Cleaning Inside The Printer Cover - Canon MultiPASS C755 User Manual

Periodic Cleaning

Your MultiPASS requires little periodic maintenance. This section describes the
necessary cleaning procedures for your MultiPASS. Please note the following before
cleaning your unit:
• Be sure to disconnect the power cord before cleaning the MultiPASS. Since
documents in memory are erased when the power is disconnected, print any
documents stored in memory before disconnecting the power cord. (1 pp. 7-16, 8-15,
8-17)
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick
to the components or generate static charges.
c
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical
cleaner to clean the interior of the MultiPASS; these can damage the MultiPASS
components.

Cleaning the MultiPASS' Exterior

Clean the MultiPASS' outer casing as follows:
1
Disconnect the power cord from the
MultiPASS.
2
Wipe the MultiPASS' exterior with a clean,
soft, lint-free cloth moistened with water or
diluted dishwashing detergent solution.
3
When you are finished, reconnect the power
cord.

Cleaning the MultiPASS' Interior

Cleaning Inside the Printer Cover

To prevent ink spots and paper dust from accumulating inside the MultiPASS and
affecting print quality, clean the unit's print area periodically as follows:
1
Disconnect the power cord from the
MultiPASS.
2
Open the document tray.
12-2
Maintenance Chapter 12