Connecting The Power Cord - Canon MultiPASS C755 User Manual

Connecting the Power Cord

Before connecting the power cord, read the guidelines in Important Safety Instructions .
(1 p. 1-8)
Connect the power cord as follows:
Connect the supplied power
cord to the power cord
connector on the back of the
MultiPASS. Then connect the
other end into a properly
grounded 120 V AC three-
prong outlet.
The MultiPASS has no power switch, so its power is on as long as it is plugged in.
Once connected, though, the unit still needs to warm up before you can use it. Wait
until the LCD no longer displays PLEASE WAIT.
n
• The MultiPASS is equipped with a three-prong, grounding-type plug provided with a third
(grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety
feature. If you are unable to insert the plug into your outlet, contact an electrician to
replace your outlet. Do not defeat the safety purpose of the grounding-type plug by
breaking off the third prong or using a 3-to-2 adapter.
• Do not plug the MultiPASS into the same circuit as an appliance such as an air
conditioner, electric typewriter, television, or copier. Such devices generate electrical
noise that can interfere with your MultiPASS' ability to send and receive faxes.
2-8
Setting Up
The socket outlet shall be installed
near the equipment and shall be
easily accessible.
Chapter 2