Canon MultiPASS C755 User Manual page 149

8
Install the BJ tanks into the BJ
cartridge. Be sure to install them in
their correct slot. The illustration here
shows the correct color array of BJ
tanks in a BJ cartridge.
• For details on the BJ tanks for each BJ
cartridge, 1 p. 12-6.
Start with the far right BJ tank.
If you are installing a new BJ tank,
remove the packing film by pulling on
the orange tape q. Then grip the
bottom of the BJ tank and twist off the
orange protective cap in the direction
shown w.
• If you are simply replacing the BJ cartridge
and not the BJ tanks, reinsert the partially
used BJ tanks into the new BJ cartridge. Be
sure to insert them in their correct slot and
from right to left.
• For a new BJ tank, carefully remove the
packing film taking care not to remove the
label from the BJ tank.
• Discard the packing film and cap. Never
attempt to reattach them to the BJ tank.
• Do not touch the ink port on the BJ tank.
• Spilled ink can stain any surface; protect
yourself and your work area.
9
Insert the BJ tank into the far right slot
on the BJ cartridge, then press it
down from the top until it clicks into
position.
Chapter 12
Color or Photo BJ cartridge
Ink Tank Ink Tank Ink Tank Ink Tank
BCI-3BK BCI-3C BCI-3M BCI-3Y
Black Cyan
Magenta Yellow
Made in Japan Made in Japan Made in Japan Made in Japan
PUSH PUSH PUSH PUSH
YELLOW
MAGENTA
CYAN
BLACK
2
1
TO PREVENT INK SPILLS, DO NOT
PRESS THE SIDES OF THE BJ TANK.
Maintenance
12-13