Periodic Cleaning
Your MultiPASS requires little periodic maintenance. Follow these guidelines to keep your
MultiPASS in good operating condition:
I
Before you clean the MultiPASS, be sure to print any faxes stored in memory.
I
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges.
I
Be sure to disconnect the power cord before cleaning the unit.
n
When the power cord is disconnected, the image memory is completely erased. Therefore,
before you begin cleaning the MultiPASS, be sure to print any faxes stored in its memory.
Printing a Document in Memory
c
Do not use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the exterior or interior of the MultiPASS, as they can damage its components.
Cleaning the Outside of the MultiPASS
1. Disconnect the power cord from the MultiPASS.
2. Wipe the exterior of the unit with a clean, soft, lint-free cloth moistened with water or
diluted dishwashing detergent solution.
3. Plug the power cord back in.
Chapter 7
Maintenance
7-4