Assigning Expansion Instruction Function Codes - Omron SYSMAC CPM2B Operation Manual

Programming Console Operations
Key Sequence
1, 2, 3...

6-2-5 Assigning Expansion Instruction Function Codes

1, 2, 3...
Follow the procedure below to turn the key-input buzzer on and off.
1. Press the CLR, SHIFT, and then the CLR Key to bring up the mode display.
In this case the PC is in PROGRAM mode and the buzzer is ON.
CLR SHIFT
2. Press the SHIFT and then the 1 Key to turn off the buzzer.
SHIFT
3. Press the SHIFT and then the 1 Key again to turn the buzzer back ON.
SHIFT
This operation is used to display or change the expansion instructions assigned
to expansion instruction function codes. The assignments can be displayed in
any mode, but can be changed in PROGRAM mode only.
Operation
Read assignment OK
Change assignment No
Assign expansion instruction function codes before inputting the program.
The CPM2B will not operate properly if expansion instructions aren't as-
signed correctly. An expansion instruction can be assigned to one function
code only.
The PC Setup must be set for user-defined expansion instruction assign-
ments. Set bits 8 to 11 of DM 6602 to 1 and turn the PC's power off and then
on again to enable the new setting.
There are tables in Section 5 Instruction Set showing the default function
code assignments in the CPM2B.
1. Press the CLR Key to bring up the initial display.
2. Press the EXT Key to display the assignment for the first function code (17).
3. Press the Up and Down Arrow Keys to scroll through the expansion instruc-
tion function codes.
4. Press the CHG Key to assign a different expansion instruction to the selec-
ted function code.
5. Press the Up and Down Arrow Keys to scroll through the expansion instruc-
tions that can be assigned to the selected function code.
<MONITOR>
CLR
<MONITOR>
B
1
The buzzer will not sound
when "BZ" is not displayed.
<MONITOR>
B
1
RUN MONITOR
OK
No
INST TBL
EXT
FUN017:ASFT
INST TBL
↓
FUN018:FUN
INST TBL
CHG
FUN018:FUN ~????
INST TBL
↓
FUN018:FUN ~HEX
Section 6-2
BZ
BZ
PROGRAM
OK
OK
READ
READ
CHG?
CHG?
87