3 Installation - Delta RPI Series Operation And Installation Manual

Installation
3 Installation
- The unit should not be installed in direct sunlight.
- Do not install the unit near or on flammable surfaces.
- Please mount the unit tightly on a solid / smooth surface.
This unit is designed to be wall-mounted. Please ensure the installation is
perpendicular to the floor and the AC plug at the bottom. Do not install the device
on a slanting wall.
To mount the inverter on the wall, please follow the procedure below:
1. Screw the mounting bracket on the wall with 12 M6 Phillips head screws.
Please refer to Figure 3-3.
* Upper 6 screws must be locked at least.
2. Attach the inverter to the mounting bracket.
3. Fix the inverter with 2 M6 Phillips head screws.
Please refer to Figure 3-4.
82.0
CAUTION !
WARNING !
460.0
400.0
12-Φ6.5
82.0 82.0
Figure 3-1 : Mounting bracket dimension
14
105°
82.0 82.0
30.0
4-R10.0
31.0
127.7
14.1
25.0