Replace Internal String Fuse - Delta RPI Series Operation And Installation Manual

Grid-tie transformerless solar inverter
Hide thumbs Also See for RPI Series:
Table of Contents

Advertisement

Maintenance

6.2 Replace Internal String Fuse

RPI M50A model have internal string fuse in each Positive and Negative DC
connector. The specifications of these fuses are revealed as below.
Item : String Fuse (source 1)
Part number : 0SPF015.T
Rate amp : 15 A
Rate voltage : 1000 V
Manufacturers : Littelfuse
Please check the fuses if the power generation of inverter is abnormal.
1. Switch AC and DC power off and wait until LCD display turn off.
2. Loosen the 6 screws on the front cover. (Figure 6-1)
3. Pull out the fuse holder and check the fuse. (Figure 6-5)
4. Replace the fuse if necessary. (Figure 6-6)
5. Reassemble the inverter. Please be careful the waterproof tape for ensure the
protection degree.
Figure 6-5 : Pull out the fuse
54
Item : String Fuse (source 2)
Part number : 10GPV15U0
Rate amp : 15 A
Rate voltage : 1000 V
Manufacturers : Hollyland

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rpi m50a 12sRpi503m221000

Table of Contents