Toro Reelmaster 4500–D Service Manual page 243

6. Remove 2 pins and 2 springs from balance ring as-
sembly, see Fig. 71.
7. Remove balance ring assembly.
8. Remove inner and outer face seals from balance ring.
9. Remove the valve.
10. Remove the valve plate.
11. Remove the 3[76] diameter seal from valve plate.
12. Remove the valve drive.
13. Remove the Geroler. Be sure to retain the rollers in
the outer ring if they are loose.
14. Remove the drive.
15. Remove the 3[76] diameter seal from wear plate,
see Fig. 73.
16. Remove the wear plate.
17. Remove the shaft face seal from the wear plate.
18. Remove the 3[76] diameter seal from bearing hous-
ing.
Reelmaster 4500–D
Page 4 – 81
Figure 71
Figure 72
Figure 73
Figure 74
Hydraulic System