Toro Reelmaster 4500–D Service Manual page 211

23. Install drive spacer(s), when used, in meter, see
Fig. 48.
24. Install 3" diameter seal in end cap.
25. Install end cap on gerotor, align holes.
26. Install 7 dry cap screws with new seal washers in
end cap. Pre–tighten screws to 150 inch pounds, ten
torque screws to 275 inch pounds in sequence shown
in Fig. 49.
Reelmaster 4500–D
Page 4 – 49
Figure 48
Figure 49
Hydraulic System