General Information; Alternator Belt Adjustment - Toro Reelmaster 4500–D Service Manual

General Information

Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Special Tools section. The use
of some specialized test equipment is explained, how-
ever, the cost of the test equipment and the specialized
nature of some repairs may dictate that the work be
done at a engine repair facility. If no parts list is available
Alternator Belt
1. Proper tension will allow 3/8 in. (10 mm) deflection
when a force of 10 lbs. is applied on the belt midway be-
tween the pulleys.
2. If deflection is not 3/8 in. (10 mm), loosen alternator
mounting bolts. Increase or decrease alternator belt
tension and tighten bolts. Check deflection of belt again
to assure tension is correct.
Reelmaster 4500–D
be sure to provide your Distributor with the TORO Model
Number and Serial Number.
The engine used in the Reelmaster 4500–D is manufac-
tured by Mitsubishi Heavy Industries. Service and repair
parts for Mitsubishi engines are supplied through TORO
Distributors. Repair parts may be ordered by TORO Part
Number
2
Page 3 – 5
1
Figure 6
1. Alternator belt
2. Mounting bolt
Engine