Toro Recycler 20379 Operator's Manual
Toro Recycler 20379 Operator's Manual

Toro Recycler 20379 Operator's Manual

Hide thumbs Also See for Recycler 20379:

Advertisement

Quick Links

22in Recycler
Model No. 20379—Serial No. 407810000 and Up

Introduction

This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns on
residential properties. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Figure 1
Figure 1
Register at www.Toro.com.
Lawn Mower
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
g307059
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Form No. 3442-471 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
WARNING
CALIFORNIA
*3442-471*
Original Instructions (EN)
Printed in Mexico
All Rights Reserved
g000502

Advertisement

Table of Contents
loading

Summary of Contents for Toro Recycler 20379

  • Page 1: Introduction

    Authorized Service The enclosed engine owner's manual is supplied Dealer or Toro Customer Service and have the model for information regarding the US Environmental and serial numbers of your product ready.
  • Page 2: Table Of Contents

    Contents Safety Introduction ............... 1 This machine has been designed in accordance with Safety ............... 2 ANSI B71.1-2017. General Safety ........... 2 Safety and Instructional Decals ......3 General Safety Setup ................ 4 1 Assembling and Unfolding the Handle....4 This product is capable of amputating hands and 2 Installing the Recoil-Starter Rope in the feet and of throwing objects.
  • Page 3: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark decal133-8062 133-8062 1. This mark indicates that the blade is identified as a part from the original machine manufacturer.
  • Page 4: Setup

    Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Assembling and Unfolding the Handle No Parts Required Procedure g230890 Figure 3...
  • Page 5: Installing The Recoil-Starter Rope In The Rope Guide

    Installing the Recoil-Starter Rope in the Rope Guide No Parts Required Procedure Important: To start the engine safely and easily whenever you use the machine, install the recoil-starter rope in the rope guide. g230180 Figure 4...
  • Page 6: Adding Oil To The Engine

    Adding Oil to the Engine No Parts Required Procedure Important: If the oil level in the engine is too low or too high and you run the engine, you may damage the engine. g235721 Figure 5...
  • Page 7: Assembling The Grass Bag

    Assembling the Grass Bag No Parts Required Procedure g235791 Figure 6...
  • Page 8: Product Overview

    Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and accessories. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories.
  • Page 9: Operation

    Operation – Avoid prolonged breathing of vapors. – Keep your hands and face away from the nozzle and the fuel-tank opening. Note: Determine the left and right sides of the machine from the normal operating position. – Keep fuel away from your eyes and skin. Before Operation Filling the Fuel Tank Before Operation Safety...
  • Page 10: Checking The Engine-Oil Level

    Checking the Engine-Oil Level Service Interval: Before each use or daily Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g235721 Figure 10 Adjusting the Handle Move the handle to the upper or lower height position.
  • Page 11: Adjusting The Cutting Height

    Adjusting the Cutting Height DANGER Adjusting the cutting-height levers could bring your hands into contact with a moving blade and result in serious injury. • Shut off the engine and wait for all moving parts to stop before adjusting the cutting height. •...
  • Page 12: During Operation

    Check the grass catcher components and the machine. Do not engage in any activity that discharge chute frequently for any wear or causes distractions; otherwise, injury or property deterioration and replace them with genuine Toro damage may occur. parts when necessary. •...
  • Page 13: Using The Self-Propel Drive

    Using the Self-Propel Drive For Self-Propel-Drive Models Only • To engage the self-propel drive, pull the self-propel-drive bar to the handle and hold it (Figure 14). g240765 Figure 14 1. Self-propel-drive bar Note: The maximum self-propel-drive speed is fixed. To reduce the speed, increase the space between the self-propel-drive bar and the handle.
  • Page 14: Bagging The Clippings

    Bagging the Clippings Use the grass bag when you want to collect grass and leaf clippings from the lawn. If the side-discharge chute is on the machine, remove it; refer to Removing the Side-Discharge Chute (page 14). Installing the Grass Bag Raise and hold up the rear deflector (A of Figure 15).
  • Page 15: Operating Tips

    General Safety plug, and examine the machine for damage. • For best performance, install a new Toro blade • Always shut off the machine, wait for all moving before the cutting season begins or when parts to stop, and allow the machine to cool before necessary.
  • Page 16: Folding The Handle

    g189871 Figure 18 1. Handle knob 2. Carriage bolt Fold the handle by rotating it forward (Figure 19). g193192 Figure 17 1. Washout port Turn the water on. Start the engine and run it until the clippings no longer come out from under the machine. Shut off the engine.
  • Page 17: Maintenance

    Important: To ensure optimum performance of the machine, Before tipping the machine to use only genuine Toro replacement parts and change the oil or replace the blade, allow the accessories. Replacement parts and accessories fuel tank to run dry through normal usage. If...
  • Page 18: Servicing The Air Filter

    Servicing the Air Filter Changing the Engine Oil Service Interval: Yearly Service Interval: Yearly Press down on the latch tabs on top of the Note: Run the engine a few minutes before changing air-filter cover (Figure 22). the oil to warm it. Warm oil flows better and carries more contaminants.
  • Page 19: Replacing The Blade

    Replacing the Blade Service Interval: Yearly Important: You will need a torque wrench to install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an Authorized Service Dealer. Examine the blade whenever you run out of fuel. If the blade is damaged or cracked, replace it immediately.
  • Page 20: Adjusting The Self-Propel Drive

    Adjusting the Self-Propel Drive For Self-Propel-Drive Models Only Whenever you install a new self-propel cable or if the self-propel drive is out of adjustment, adjust the self-propel drive. Turn the adjustment nut counterclockwise to loosen the cable adjustments (Figure 27). g231390 Figure 26 g273506...
  • Page 21: Storage

    Preparing the Machine for Storage On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile.
  • Page 22 Notes:...
  • Page 23 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.

Table of Contents