Drive System; Removing The Folder Motor (M71) - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS

3.4 Drive System

3.4.1 Removing the Folder Motor
(M71)
1) Open the upper cover, and remove the
rear cover.
2) Remove the right lower cover.
3) Remove the four screws, and detach the
inside cover (front).
4) Remove the two screws [1], and free the
drive belt [2] from the gear [3].
5) Disconnect the connector [4], and de-
tach the folder motor [5].
3-78
COPYRIGHT© 2001 CANON INC.
[3]
[5]
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[2] [1]
[1]
F03-304-01
[4]
F03-304-02