Stapling Of Last Sheet - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 2 OPERATION OVERVIEW

5.1.4 Stapling of last sheet

When the last sheet of paper has been aligned, the front and rear jogging plates move for-
ward and hold the paper in place. Then, the swing guide motor begins to rotate to lower the
swing guide. Now, the finisher controller PCB moves the stapler into the selected stapling
position, and the paper is stapled.
Once the stapling is finished, the finisher controller PCB activates the jogging motor to
move the jogging plates to a position 10mm behind the trailing edge of the paper. Then, the
stack delivery motor (M7) rotates forward and the stack is ejected into tray B.
Paper to be
stapled
2-58
COPYRIGHT© 2001 CANON INC.
Swing guide
Tray B
Stack delivery
roller
F02-501-05
2000 2000 2000 2000
Sort delivery roller
Knurled belt
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001