Knurled Belt Releasing Unit; Removing The Knurled Belt Releasing Unit - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS
1.4 Knurled Belt Releasing
Unit
1.4.1 Removing the Knurled Belt
Releasing Unit
1) Disconnect the finisher from the copier.
2) Disconnect the two connectors [1], and
remove the two screws [2].
3) While freeing the knurled belt [3] from
the pulley [4], detach the knurled belt
releasing unit [5].
3-26
COPYRIGHT© 2001 CANON INC.
[4]
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[2]
[1]
F03-104-01
[3]
[5]
F03-104-02
[1]
[4]