Job Offset; Overview - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 2 OPERATION OVERVIEW

2.3 Job offset

2.3.1 Overview

In job offset mode, stacks of sheets are moved to the front or rear for sorting purposes.
The stacks are moved to the front or rear by the front jogging plate and rear jogging
plate. Sheets moving past the stack delivery roller are moved by the paddle in the direction
of the stopper. The swing guide is in the up position while pulling a sheet into the process-
ing tray or while the jogging plates are in operation; it is in the down position while the
stack is being delivered.
When the power is turned on, the finisher controller PCB drives the front jogging plate
motor (M4) and the rear jogging plate motor (M5) to return the two jogging plates to their
home positions.
Sensor Notation
Front jogging P17
plate home
position sensor
Rear jogging P18
plate home
position sensor
Swing guide P114
closed sensor
Swing guide P115
open sensor
Paddle home P113
position sensor
T02-203-01
2-34
COPYRIGHT© 2001 CANON INC.
Connector
J104B-3
J104B-6
J107B-2
J107B-6
J107A-8
2000 2000 2000 2000
Function
Drives the front Front jogging
jogging plate plate motor
Drives the rear Rear jogging
jogging plate plate motor
Swing guide Swing motor
drive
Drives the paddle Paddle motor
(feeds paper)
T02-203-02
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
Motor Notation
M4
M5
M8
M9