Removing The No. 1/No; Paper Deflecting Plate - Canon SADDLE FINISHER K3 Service Manual

2.1.5 Removing the No. 1/No. 2

Paper Deflecting Plate

Remove the finisher assembly rear cover.
1) Remove the two tension springs [1] to
release the inlet guide plate [2].
2) Free the claw [3] of the deflecting plate
bushing, and pull out the deflecting
plate shaft [4] toward the rear of the ma-
chine.
3) Detach the front shaft [5] of the paper
deflecting plate from the front side
plate, and detach the paper deflecting
plate [6] in the direction shown in the
figure.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[2]
[1]
F03-201-36
[3]
F03-201-37
1
2
[5]
F03-201-38
[2]
[1]
[4]
[6]
3-59