Removing The Staple Drive Unit - Canon Staple Finisher-AA1 Service Manual

2x
[2]
CAUTION:
When replacing the Processing Tray, remove the
coupling unit from the removed Processing Tray and
then install it in the replacement tray.
[2]
5. Remove the paper guide [1].
[1]
[2]
[1]
[1]
4. Parts Replacement and Cleaning
CAUTION:
Attach the processing tray unit first or the paper
guide[2] is not attached as the processing tray unit
interferes with attaching it.
Spread the alignment plate[1] and then attach the
paper guide[2] for installation.
[2]
Removing the Staple Drive
Unit
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
3. Remove the stapler unit.
" Removing the Stapler Unit" on page 108
103
[2]
[1]