Stapler Unit; Removing The Stapler - Canon SADDLE FINISHER K3 Service Manual

1.7 Stapler Unit

1.7.1 Removing the Stapler

1) Open the front cover, and remove the
inside cover.
2) Disconnect the connector [1], and re-
move the two screws [2]; then, detach
the switch PCB [3] together with the
base.
3) Disconnect the two connectors [4], and
remove the two screws [5]; then, detach
the stapler [7]. Before removing, be
sure to take note of the stapler position-
ing index.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[3] [2]
[1] [2]
F03-107-01
Index
[5]
F03-107-0-2
[6]
[4]
3-33